Disassembling the Internal PE layer and reassembling 30/5/2012

This is the final version of complete internal box before inserting in to the external box.

The inner chamber made from PE sheets and glued together on 24/5/2012 was not strong enough, therefore it was taken apart. The brackets were used to screw the sides together to make the frame more rigid.

Procedure

– holes were drilled with 6 mm drill in the PE sheets, for the bottom 4 cm from each corner for the sides and ceiling 10 cm from sides (with few exceptions)
– simple brackets with one M5 12 mm screw on each of it’s side with washers were used to screw the sides and ceiling together, the bottom was left for later

Advertisements

~ by algoldor on 08/06/2012.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: